Certification
Please choose one of our certificates.
Unsaturated Polyester (UP), glass reinforced, "LOMIX", furnished as bulk (BMC)
or sheet (SMC) molding
| Color | Min Thk (mm) | Flame Class | HWI | HAI | RTI Elec | RTI Imp | RTI Str |
|---|---|---|---|---|---|---|---|
| ALL | 0.4 | V-0 | 2 | 0 | 105 | 130 | 130 |
| 0.75 | V-0 | 2 | 0 | 105 | 130 | 130 | |
| 1.5 | V-0 | 0 | 0 | 105 | 130 | 130 | |
| 3.0 | V-0 | 0 | 0 | 105 | 130 | 130 |
Comparative Tracking Index (CTI): 0
Dielectric Strength (kV/mm): -
High-Voltage Arc Tracking Rate (HVTR): -
Dimensional Stability (%): -
Inclined Plane Tracking (IPT): -
Volume Resistivity (10x ohm-cm): -
High Volt, Low Current Arc Resis (D495): 3
(xxx) -Denotes a 3 digit number representing color code.
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date: 2012-11-15
Last Revised: 2012-11-15
IEC and ISO Test Methods
| Test Name | Test Method | Units | Thickness Tested (mm) | Value |
|---|---|---|---|---|
| Flammability | IEC 60695-11-10 | Class (color) | 0.4 | V-0 (ALL) |
| 0.75 | V-0 (ALL) | |||
| 1.5 | V-0 (ALL) | |||
| 3.0 | V-0 (ALL) | |||
| Glow-Wire Flammability (GWFI) | IEC 60695-2-12 | C | 0.75 | 960 |
| 1.5 | 960 | |||
| 3.0 | 960 | |||
| Glow-Wire Ignition (GWIT) | IEC 60695-2-13 | 0.75 | 960 | |
| 1.5 | 960 | |||
| 3.0 | 960 | |||
| IEC Comparative Tracking Index | IEC 60112 | Volts (Max) | - | - |
| IEC Ball Pressure | IEC 60695-10-2 | C | 3.0 | 150 |
| ISO Heat Deflection (1.80 MPa) | ISO 75-2 | C | - | - |
| ISO Tensile Strength | ISO 527-2 | MPa | - | - |
| ISO Flexural Strength | ISO 178 | MPa | - | - |
| ISO Tensile Impact | ISO 8256 | kJ/m2 | - | - |
| ISO Izod Impact | ISO 180 | kJ/m2 | - | - |
| ISO Charpy Impact | ISO 179-2 | kJ/m2 | - | - |
© 2013 UL LLC
Test Report: ICL/H12/1889
BS EN ISO 4589 – 2: 1999
PLASTICS – DETERMINATION OF BURNING BEHAVIOUR
BY OXYGEN INDEX
PART 2. Ambient – Temperature test
Sponsored By
Global Fiberglass Solutions Inc
800 Bellevue Way NE Suite 400
Bellevue, WA 98004
USA
Purpose of Test
To assess the performance of a reinforced sheet product when it is tested using the
apparatus specified in BS EN ISO 4589 – 2: 1999 “Plastics – Determination of burning
behaviour by oxygen index Part 2 Ambient – temperature test”.
Description of Test Specimen
The description of the specimen given below has been prepared from information
provided by the sponsor of the test and Interscience Communications Ltd was not
involved in any selection or sampling procedure.
The test specimens consisted of reinforced 4mm thick moulding referenced
“Lomix BMC 0204/P100”.
The sponsor of the test did not provide further details relating to the composition of the
material from which the specimens were produced.
Conditioning of Test Specimens
The specimens were received on 26 November 2012.
The test specimens were conditioned at 23 ± 2°C and 50 ± 5% relative humidity for a
minimum period of 88 hours prior to testing.
Date of Test
The test was performed on 30 November 2012.
Test Procedure
Test was carried out in accordance with the procedure specified in section 8 of ISO
4589 Part 2 and this report should be read in conjunction with this standard.
Specimens measuring nominally 80 mm long by 10 mm wide by 4 mm thick were used.
The thickness of the specimens used conforms with the requirements specified in Table
2 of the Standard for test specimen Form III.
Top surface Ignition as specified in Section 8.2.2 was used.
Test Results
The test results relate only to the behaviour of the specimens of the product under the
particular conditions of test; they are not intended to be the sole criterion for assessing
the potential fire hazard of the product in use.
The test results relate only to the specimens of the product in the form in which they
Were tested. Small differences in the composition or thickness of the product may
Significantly affect the performance during the test and may therefore invalidate the test
results.
| Section 1: Determination of oxygen concentration for one pair of "X" and "O" responses at ≤1% (v/v) O2 (in accordance with 8.5) |
|---|
| 02 Concentration (%) | 40 | 44 | 46 | 54 | 60 | 70 | 78 | 83 | 90 | 100 |
| Burn period (sec) | 10 | 10 | 10 | 20 | 20 | 30 | 20 | 30 | 37 | 30 |
| Burn length (mm) | >5 | >5 | >5 | >5 | >5 | >5 | 5 | 5 | 5 | 6 |
| Response (O or X) | o | o | o | o | o | o | o | o | o | o |
Conclusion
When tested in accordance with the procedures specified in BS EN ISO 4589-2: 1999
The material did not sustain ignition at 100% oxygen concentration.
| Prepared by | Approved by |
| C.B.Chong | S.Kumar |
| Fire Scientist | Technical Manager |
Tested product
| Name | LOMIX BMC 0204 |
| Description | Mix from filler, polyster resin, glassfibre, hardener, stabilizer and release agent. |
| Density | 1,9g/cm3 |
| Color | White |
| Thickness | 4 mm |
| Remarks | Batch 719 218 – 11/03/2013 |
| Manufacturer | LOMIX |
Classification Certificate
| Company | LORENZ |
| Name | Peter Ooms |
| Adress | 75, Hansastrasse |
| Postcode | 49134 |
| Town | Wallenhorst |
| Country | Germany |
| Test standard | Concern | Results |
|---|---|---|
| NF X 70-100-1/2 | Smoke toxicity | ITC: 4,24 |
| NF X 10- 702 | Smoke opacity | Dm 185 VOF4 22 |
| Classification standard | Name |
|---|---|
| NF F 16-101 | Rolling stock – Fire behaviour – Materials choosing |
| STM S-001 indice C | Device technical specification |
Test Report
| Test report n° | REE 1F 1601/01/086A |
| Date | 03/05/13 |
| Manager | Stéphane BOISSEL |
| Company | LORENZ |
| Name | Peter Ooms |
| Adress | 75, Hansastrasse |
| Postcode | 49134 |
| Town | Wallenhorst |
| Country | Germany |
| Test standard: |
NF X 70-100-1: Analysis of gaseous effluents: Methods for analysing gases stemming from thermal degradation |
| Accredited COFRAC test: |
COFRAC accreditation attests competence oft he laboratories for the only tests covered by the accreditation |
Tested product
| Name: | LOMIX BMC 0204 |
| Description: | Mix from filler, polyster resin, glassfibre, hardener, stabilizer and release agent |
| Density: | 1,9g/cm3 |
| Color: | White |
| Remarks: | Batch 719 218 – 11/03/2013 |
| Conditionning: | 23 ± 2 °C, 50 ± 5% HR |
These results are valid for the fire-test-exposure conditions described in this procedure and for the specimens assessed.
Results
| Reception date: | 27/03/13 | |
| Furnace temperature | 600 °C | Air circulation method: Pumping |
| Amount | Sample 1 | Sample 2 | Sample 3 | Average | Test date |
|---|---|---|---|---|---|
| CO (mg/g) | 75,21 | 67,21 | 50,78 | 64,40 | 11/04/13 |
| CO2 (mg/g) | 364,18 | 318,92 | 532,95 | 426,35 | 11/04/13 |
| HCI (mg/g) | 0,00 | 11/04/13 | |||
| HBr (mg/g) | 0,00 | 11/04/13 | |||
| HCN (mg/g) | 0,00 | 11/04/13 | |||
| HF (mg/g) | 0,00 | 11/04/13 | |||
| SO2 (mg/g) | 0,22 | 0,26 | 0,22 | 0,23 | 11/04/13 |
Test Report
| Test report n° | REE 2F 1601/01/086A |
| Date | 03/05/03 |
| Manager | Stéphane BOISSEL |
| Company | LORENZ |
| Name | Peter Ooms |
| Adress | 75, Hansastrasse |
| Postcode | 49134 |
| Town | Wallenhorst |
| Country | Germany |
| Test standard: | NF X 10-702: Assesment of smoke opacity unrenewed atmosphere |
| Accredited COFRAC test: | COFRAC accreditation attests competence of the laboratories for the only tests covered by the accreditation |
Tested product
| Name: | LOMIX BMC 0204 |
| Description: | Mix from filler, polyster resin, glassfibre, hardener, stabilizer and release agent. |
| Density: | 1,9g/cm3 |
| Color: | White |
| Remarks: | Batch 719 218 – 11/03/2013 |
| Size: | 76 mm x 76 mm x 4 mm |
| Conditionning: | 23 ± 2 °C, 50 ± 5% RH |
These results are valid for the fire-test-exposure conditions described in this procedure and for the specimens assessed.
Results
| Reception Date: | 27/03/13 |
| Test Date: | 12/04/13 |
| Test 1 | Test 2 | Test 3 | Test 4 | Average | |
|---|---|---|---|---|---|
| NF | F | F | F | / | |
| Mass (g) | 44,16 | 44,48 | 44,57 | 44,30 | / |
| Thickness (mm) | 4,0 | 4,0 | 4,0 | 4,0 | / |
| Mass loss (%) | 17 | 24 | 28 | 27 | / |
| VOF4 | 10 | 30 | 15 | 20 | 22 |
| tds 16 (s) | 365 | 219 | 269 | 253 | / |
| DS max | 98 | 173 | 188 | 193 | 185 |
Test report
Certificate N° REE 2F 1601/01/086A
Classification Certificate
| Test report n° | REE 1F 1601/01/086A |
| Date | 03/05/13 |
| Manager | Stéphane BOISSEL |
| Company | LORENZ |
| Name | Peter Ooms |
| Adress | 75, Hansastrasse |
| Postcode | 49134 |
| Town | Wallenhorst |
| Country | Germany |
Certificate n° CCE I 1601/01/086A
Date 03/05/13
Manager Stéphane BOISSEL
Company LORENZ
Name Peter Ooms
Adress 75, Hansastrasse
Postcode 49134
Town Wallenhorst
Country Germany
Tested product
Name: LOMIX BMC 0204
Description: Mix from filler, polyster resin, glassfibre, hardener, stabilizer and release agent.
Density: 1,9 g/cm3
Color: White
Thickness: 4 mm
Remarks: /
Manufacturer: Batch 719 218 – 11/03/2013
Results
| Test standard | Concern | Results |
| ISO 4589-2 | Limit Oxygen Index | LOI > 98,4 % |
| NF EN 60695-2-10/11 | Glow wire | No ignition at 960 °C |
| Classification standard | Name |
| NF F 16-101/102 | Rolling stock – Fire behaviour - Materials |
| STM S-001 indice C | Device technical specification |
Test report
Test Report n° REE 1I 1601/01/086A
Date 03/05/13
Manager Stéphane BOISSEL nbsp]
Company LORENZ
Name Peter Ooms
Adress 75, Hansastrasse
Postcode 49134
Town Wallenhorst
Country Germany
Test standard: ISO 4589-2: Determination of burning behaviour by oxygen index
Accredited COFRAC test: COFRAC accreditation attests competence of the laboratories for the only tests covered by the accreditation
The results are valid only for the fire-test-exposure conditions described in this procedure and for the specimens assessed.
These results of the test may be used as elements of a fire-hazard assessment or a fire-risk assessment which takes into account all of the factores which are pertinent to an assessment of the fire-hazard or fire-risk of a particular end use.
Tested product
Name: Mix from filler, polyster resin, glassfibre, hardener, stabilizer and release agent.
Density: 1,9 g/cm3
Color: White
Remarks: Batch 719 218 – 11/03/2013
Size: 150 mm x 10 mm x 4 mm Type: I
Conditionning: 23 ± 2 °C, 50 ± 5 % HR
Results
Sample reception: 27/03/13
Ignition: 0.20 %
| LOI (%) | Standard devation (%) | Test date |
| > 98,4 | Not applicable | 12/04/13 |
Remarks: /
Test Report
Test Report n° REE 2I 1601/01/086A
Date 03/05/13
Manager Stéphane BOISSEL
Company LORENZ
Name: Peter Ooms
Adress 75, Hansastrasse
Postcode 49134
Town Wallenhorst
Country Germany
Test standards: NF EN 60695-2-10: Glow wire test / Test Apparatus
NF N 60695-2-11: Glow wire test / Flammability test method for devices
Accredited COFRAC test: COFRAC accreditation attests competence oft he laboratories for the only tests covered by the accreditation
Tested product
Name: zLOMIX BMC 0204
Description: Mix from filler, polyster resin, glassfibre, hardener, stabilizer and release agent.
Density: 1,9 g/cm3
Color: White
Remarks: Batch 719 218 – 11/03/2013
Size: 60 mm x 60 mm x 4 mm
Conditionning: 23 ± 2 °C, 50 ± 5 % RH
The results are valid only for the fire-test-exposure conditions described in this procedure and for the specimens assessed.
Results
Reception date: 19/04/13
| Test temperature (°C) | 960 | 960 | 960 |
| Ignition time (s) | / | / | / |
| Extinction time (s) | / | / | / |
| After removing glowire afterflamming (s) | / | / | / |
| Flame height (mm) | / | / | / |
| Ignition of subjacent coat | NO | NO | NO |
Remarks: No ignition at 960 °C
